Philips PM 5132 - Versionshistorie

Robotto med 5. apr 2011, 16:29

Robotto — Tue, 05 Apr 2011 16:29:14 GMT

←Ældre version		Versionen fra 5. apr 2011, 16:29
Linje 33:		Linje 33:

	\|id = 3006		\|id = 3006
-	\|category = ~~Hack~~	+	\|category = Do hack
	\|categorizer = Mark		\|categorizer = Mark
	\|owner = OSAA		\|owner = OSAA

Robotto med 5. apr 2011, 16:27

Robotto — Tue, 05 Apr 2011 16:27:55 GMT

←Ældre version		Versionen fra 5. apr 2011, 16:27
Linje 33:		Linje 33:

	\|id = 3006		\|id = 3006
-	\|category = Do Hack	+	\|category = Hack
	\|categorizer = Mark		\|categorizer = Mark
	\|owner = OSAA		\|owner = OSAA

94.18.129.184 med 5. apr 2011, 16:26

94.18.129.184 — Tue, 05 Apr 2011 16:26:47 GMT

←Ældre version		Versionen fra 5. apr 2011, 16:26
Linje 3:		Linje 3:
	\|image = 1018-0.JPG		\|image = 1018-0.JPG

-	\|id = 1011~~, 3006~~	+	\|id = 1011
	\|category = Do not hack		\|category = Do not hack
	\|categorizer = Flemming		\|categorizer = Flemming
Linje 33:		Linje 33:

	\|id = 3006		\|id = 3006
-	\|category = ~~hack~~	+	\|category = Do Hack
	\|categorizer = Mark		\|categorizer = Mark
	\|owner = OSAA		\|owner = OSAA

Robotto med 5. apr 2011, 16:19

Robotto — Tue, 05 Apr 2011 16:19:40 GMT

←Ældre version		Versionen fra 5. apr 2011, 16:19
Linje 1:		Linje 1:
	{{Infobox gear		{{Infobox gear
-	\|title = Philips PM 5132	+	\|title = Philips PM 5132 - DO NOT HACK EDITION
	\|image = 1018-0.JPG		\|image = 1018-0.JPG

-	\|id = 1011, ~~1018~~	+	\|id = 1011, 3006
	\|category = Do not hack		\|category = Do not hack
	\|categorizer = Flemming		\|categorizer = Flemming
Linje 26:		Linje 26:
	\|data14 = 50ms to 100s<br />Sweep voltage on rear		\|data14 = 50ms to 100s<br />Sweep voltage on rear
	}}		}}
		+	}}
		+
		+	{{Infobox gear
		+	\|title = Philips PM 5132 - HACK EDITION
		+	\|image = 1018-0.JPG
		+
		+	\|id = 3006
		+	\|category = hack
		+	\|categorizer = Mark
		+	\|owner = OSAA
		+	\|type = Function Generator
		+	\|acquired = 2010
		+
	}}		}}

Linje 36:		Linje 49:
	===Warning===		===Warning===
	These frequency generators are well used and may act slightly spuriously. At least one of the power buttons is stuck. Make sure to verify the signal on an oscilloscope before connecting to your project.		These frequency generators are well used and may act slightly spuriously. At least one of the power buttons is stuck. Make sure to verify the signal on an oscilloscope before connecting to your project.
		+
		+	==HACK EDITION==
		+
		+	One of these function generators does not work, it wants to be fixed. Please comply.

Mihtjel med 29. mar 2011, 16:23

Mihtjel — Tue, 29 Mar 2011 16:23:09 GMT

←Ældre version		Versionen fra 29. mar 2011, 16:23
Linje 1:		Linje 1:
	{{Infobox gear		{{Infobox gear
	\|title = Philips PM 5132		\|title = Philips PM 5132
-	\|image = 1018-0.~~jpg~~	+	\|image = 1018-0.JPG

	\|id = 1011, 1018		\|id = 1011, 1018

Mihtjel med 29. mar 2011, 16:22

Mihtjel — Tue, 29 Mar 2011 16:22:39 GMT

←Ældre version		Versionen fra 29. mar 2011, 16:22
Linje 1:		Linje 1:
	{{Infobox gear		{{Infobox gear
	\|title = Philips PM 5132		\|title = Philips PM 5132
-	\|image = ~~1011~~-0.jpg	+	\|image = 1018-0.jpg

	\|id = 1011, 1018		\|id = 1011, 1018

Mihtjel: /* About */ Lidt om terminering

Mihtjel — Sun, 27 Mar 2011 19:38:47 GMT

About: Lidt om terminering

←Ældre version		Versionen fra 27. mar 2011, 19:38
Linje 30:		Linje 30:
	==About==		==About==

-	These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope.	+	These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope. ''Make sure you match the impedances correctly.'' The frequency generator can be switched between 50 Ohm and 600 Ohm. A typical oscilloscope has a 1 MOhm input. Use a t-piece and a 50 Ohm terminator at the scope end for testing a 50 Ohm device.

	The frequency generators offer DC-offset to for the signal as well, up to +/- 15 VDC at 0 dB attenuation.		The frequency generators offer DC-offset to for the signal as well, up to +/- 15 VDC at 0 dB attenuation.

Mihtjel med 27. mar 2011, 19:29

Mihtjel — Sun, 27 Mar 2011 19:29:57 GMT

←Ældre version		Versionen fra 27. mar 2011, 19:29
Linje 31:		Linje 31:

	These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope.		These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope.
		+
		+	The frequency generators offer DC-offset to for the signal as well, up to +/- 15 VDC at 0 dB attenuation.
		+
		+	===Warning===
		+	These frequency generators are well used and may act slightly spuriously. At least one of the power buttons is stuck. Make sure to verify the signal on an oscilloscope before connecting to your project.

Mihtjel: Oprettede siden med '{{Infobox gear |title = Philips PM 5132 |image = 1011-0.jpg |id = 1011, 1018 |category = Do not hack |categorizer = Flemming |owner = OSAA …'

Mihtjel — Sun, 27 Mar 2011 19:19:43 GMT

Oprettede siden med '{{Infobox gear |title = Philips PM 5132 |image = 1011-0.jpg |id = 1011, 1018 |category = Do not hack |categorizer = Flemming |owner = OSAA …'

Ny side

{{Infobox gear
|title = Philips PM 5132
|image = 1011-0.jpg

|id = 1011, 1018
|category = Do not hack
|categorizer = Flemming
|owner = OSAA
|type = Function Generator
|acquired = 2010

|extradata = {{Infobox
|child = yes

|headerstyle = background:#ccf;
|labelstyle = background:#ddf; width: 40%;

|header10 = Properties
|label11 = Frequencies
|data11 = 0.1 Hz - 2 MHz
|label12 = Voltage range
|data12 = 3 Vpp to 30 Vpp Attenuation to 60 dB, steps of 10 dB
|label13 = Wave forms
|data13 = Sine Triangular Square Positive pulse Negative pulse
|label14 = Sweep
|data14 = 50ms to 100s Sweep voltage on rear
}}
}}

==About==

These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope.